Free chlorine
The chlorine residual available for disinfection. It helps you check whether your chlorine-based sanitiser programme is maintaining its required level.
Concentration · ppm / mg/LVivaTest Swimming Pool & Spa 3-in-1 Test Strips help you check free chlorine, pH and total alkalinity in one simple water test. Compare the colour-changing pads with the chart on the bottle to get a practical overview of these three water-care measurements.
Designed for routine checks in chlorine-treated swimming pools, hot tubs and spas, these pool water test strips make it straightforward to monitor readings between treatments. The pack contains 150 test strips, with no electronic meter, batteries or calibration required.
Read all three results separately. An acceptable pH reading does not make up for insufficient sanitiser, and a chlorine result does not replace the need to check water balance.
Use for routine water checks in chlorine-treated swimming pools, hot tubs and spas, including above-ground and inflatable pools maintained with an appropriate treatment programme. Follow the instructions for your equipment and treatment products.
These strips list free chlorine rather than a separate bromine measurement. For a bromine-treated spa, use a test explicitly labelled for bromine or confirm compatibility with the manufacturer of your exact strips.
Follow the instructions supplied with your bottle, including the required dip time, strip position and result-reading time.
Use a fresh strip for each test. If the supplied bottle or leaflet specifies different timings or handling, follow those instructions. For a fuller explanation of colour matching and common mistakes, read our pool and spa test strip results guide.
Store in the original bottle in a cool, dry place, protected from direct light and moisture. Close the lid securely after removing a strip. Follow the labelled storage conditions and expiry date, and avoid using strips that have become wet or damaged.
Learn how to interpret your readings and build a consistent water-care routine:
These strips measure the three listed chemical parameters. They do not disinfect water, detect bacteria or confirm that water is free from infection risk. They do not provide separate readings for bromine, calcium hardness, cyanuric acid or salt concentration.
Colour matching provides an approximate result. Follow your equipment and treatment instructions, including chemical handling and bathing re-entry conditions. Use additional testing or advice from a pool or spa specialist when results are uncertain or problems persist.
Clear pricing, free UK delivery and UK-based customer support.
Your water-care routine
Check free chlorine, pH and total alkalinity with one strip. A simple colour comparison helps you understand these three measurements before deciding what your water needs.
For chlorine-treated pools, hot tubs & spasUnderstand the three pads
Each result has its own role in your treatment programme. Read all three individually and compare them with the targets for your pool or spa.
The chlorine residual available for disinfection. It helps you check whether your chlorine-based sanitiser programme is maintaining its required level.
Concentration · ppm / mg/LHow acidic or alkaline the water is. pH affects chlorine performance and is relevant to bather comfort and the care of your pool or spa equipment.
pH value · no ppm unitThe water's buffering capacity: its resistance to changes in pH. This is useful when pH keeps moving despite repeated adjustments.
Concentration · ppm / mg/LpH and alkalinity are different measurements. pH describes the current level; alkalinity helps explain its stability. A satisfactory result for one parameter does not compensate for another being outside its target.
Understand pool and spa water pH →
Inside your pack
Keep your bottle and its chart together so the right instructions are always to hand.
Have ready: a timer, dry hands and a representative water sample. Follow any instructions for collecting a sample in a clean container. Treatment products and pool-maintenance equipment are separate from the strip test.
A consistent method
Check the expiry date and read your bottle before starting. Sample away from dosing points and return outlets, after any required treatment mixing period.
With dry hands, take one strip by the plain end. Avoid touching the pads and close the bottle promptly.
Immerse all three pads in the sample for the time specified on your bottle. Start timing as directed.
Remove excess water exactly as the supplied instructions show. Keep the strip horizontal while the colours develop.
At its specified time, match each pad to its own chart row in good light. Record all three readings.
Compare these two pads with their chart rows.
Read the chlorine pad at its own later time.
Use the reading times printed on your supplied bottle. These pads have different reading times. Avoid re-reading a dried strip or re-dipping a used strip; use a new one for every test.
Read the full pool and spa testing guide →From reading to next step
The bottle chart tells you the approximate value of each result. Your equipment and sanitiser instructions tell you the target range to maintain.
Pools and hot tubs can need different operating levels. Follow the guidance for your actual treatment system, including its upper limits and bathing re-entry conditions.
For its domestic hot tub care programme, Lay-Z-Spa publishes the following targets. These illustrate one manufacturer's programme; check the requirements for your own equipment and chemicals.
| Measurement | Example target |
|---|---|
| Free chlorine | 3–5 ppm |
| pH | 7.2–7.6 |
| Total alkalinity | 80–120 ppm |
Source: Lay-Z-Spa UK chemicals guide. These figures are operating targets for that programme, rather than the strips' measurement limits or a universal range for every pool.
Review dosing and circulation. Follow the treatment label, allow its mixing and waiting period, then retest before bathing.
Use both readings when checking your care programme. Base any adjustment on the product label and the actual volume of water.
Check timing, storage and expiry. Repeat with a fresh strip; persistent uncertainty calls for a suitable reagent test or a pool specialist.
Three chemical readings are part of a wider routine. These strips do not detect bacteria or certify that water is safe for bathing. Continue the required filtration, cleaning, treatment and water replacement programme.
Build a useful habit
Regular checks help you see changes while there is time to respond. Use the monitoring schedule for your pool or spa, with extra checks when conditions change.
CDC home-water guidance recommends chlorine and pH checks at least twice daily, with more frequent checks during heavy use. A pre-bathing check gives a current reading.
More bathers, hot weather and changing conditions can increase demand on the treatment system. Follow your programme's additional testing requirements.
Recheck after refilling, major top-ups or adjustments, once the specified mixing and waiting period has passed. Check alkalinity on your care schedule and when investigating pH changes.
Recording readings and follow-up checks helps you spot a pattern and explain recurring issues to a specialist.
Storage, suitability & support
Keep strips in their original container. Replace the cap tightly after taking one out, and keep any supplied desiccant inside.
Store as labelled, away from direct light, heat and treatment chemicals. Keep wet hands and splashes away from unused strips.
Use in-date strips in good condition. Replace strips that have become damp, damaged or contaminated.
The listed sanitiser measurement is free chlorine. For a bromine-treated spa, choose a test specifically labelled for bromine or obtain compatibility confirmation for your exact strips.
Salt-chlorination systems generate chlorine, but you should still check your equipment and strip instructions for compatibility. These strips do not measure salt concentration.
Appearance cannot confirm the chemical balance or microbiological quality of water. Resolve results outside your operating targets and meet the treatment label's re-entry conditions before bathing.
If a result is doubtful, repeat the test or ask a pool or spa specialist to confirm it. Keep bathers out while an unresolved water-quality problem is being investigated.
It does not give separate readings for total or combined chlorine, bromine, calcium hardness, cyanuric acid or salt. Add the tests required by your particular care programme.
A chemical strip is not a microbiological test. Commercial and holiday-let hot tubs need their own management and monitoring arrangements; HSE's HSG282 covers spa systems used in business settings.
Contact our UK team for help with the product or your order. For persistent water-balance or treatment problems, speak to a pool or spa specialist.
General water-care information complements the instructions supplied with your strips, equipment and treatment products.
These test strips measure Free Chlorine, Total Alkalinity, and pH levels in swimming pool and spa water.
For best results, test pool water 2–3 times per week and spa water before each use or at least twice weekly.
Yes, VivaTest Swimming Pool & Spa Test Strips are suitable for swimming pools, hot tubs, spas, and inflatable pools.
When used as directed, the strips provide reliable and consistent readings suitable for routine water maintenance.
No. These test strips require no meters, batteries, or calibration.